(Click buttons or scroll down)
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Download the GGG Universal Moulding Wall Chart
Download a List of Universal Moulding Applications
GGG® The Original Universal "T" Mouldings
Proudly made in the U.S.A., the Original Gold Glass Universal Mouldings were the first universal mouldings introduced to the market in 1988. Our EPDM rubber mouldings are resistant to UV rays, oxidants, and severe weather conditions, allowing them to always remain flexible even on the coldest winter day. They will not shrink or discolor, will never crimp around corners, always lay flush against the vehicle, and never need a heat gun to install because they stay flexible. A thin layer of butyl inside the channel firmly adheres the moulding to the edge of the glass holding the moulding in place.
T-105B | 5/8" (17mm) | 75 feet per roll | ![]() |
T-105BFL | 5/8" (17mm) | 75 feet per roll with feature line | |
T-107B | 3/4" (20mm) | 75 feet per roll | |
T-107BFL | 3/4" (20mm) | 75 feet per roll with feature line | |
T-108B | 1" (25mm) | 75 feet per roll | |
T-109B | 1¼" (31mm) | 65 feet per roll |
T-110 |
3/4" (20mm) |
75' roll ("T" Insert Moulding with adhesive.) |
T-120BC |
5/8" (17mm) |
75' roll (Chrome Channel Moulding) |
All GGG Universal Mouldings:
• Reduce Inventory with GGG Universal Mouldings
• Never freeze (heat guns are not needed)
• Do not shrink or discolor over time
• Stay on without tape
• Never crimp around corners
• Always lay flush against the vehicle
• Fit both thick windshields and thin tempered parts
• Just several mouldings will fit thousands of applications
Download the GGG Universal Moulding Wall Chart
Download a List of Universal Moulding Applications
Many vehicles are designed with exposed glass edges and exposed pinch welds. One of the biggest challenges that face the auto glass technician is the successful removal and reinstallation of these parts. The trim that surrounds the glass often gets damaged when trying to save the glass sometimes leaving the glass part useless. Try these applications as a solution.
T-201 |
5/16" (8mm) |
90 linear feet |
45' roll |
An EPDM Universal Moulding with an 8mm (5/16") lip.
T-202 |
7/32" (5.5mm) |
100' roll
|
The T-202 and T-203 are specifically designed to replace damaged mouldings on quarter and back glasses with radius corners. Both are closed cell foam mouldings which allow them to go around tight radius corners better than any prior moulding. The T-202 has a 5.5mm (7/32") lip. Both are dual extruded to keep from tangling and come with an aggressive, pre-applied adhesive to affix them to the glass..
T-203 | 9/32" (7mm) | 16' roll single application | ![]() |
T-203-100' | 9/32" (7mm) |
100' roll |
A closed cell foam moulding like the T-202. It is a bit wider with a 7mm (9/32") lip.
T-100B |
1/4" fin (7mm) |
120' roll |
This moulding is a vinyl product and plastic wrapped for added protection.
T-101B |
3/8" fin (10mm) |
90' roll |
A wider version of the T-100B. This moulding is a vinyl product and is plastic wrapped for added protection.
T-101RB |
3/8" fin (10mm) |
90' roll |
Same as the T101B, but made from the same rubber compounds as the Original GGG Universal T Moulding
T-301B |
1/4" fin (7mm) |
75' roll |
Wraps perfectly around tight radius corners without leaving gaps.
GGG® Universal ET-Economy Mouldings
Gold Glass Group offers a high-quality line of ET-Economy Mouldings. An inexpensive high quality moulding when compared to others. Our EPDM rubber mouldings are resistant to ozone, oxidants, and severe weather conditions, allowing them to always remain flexible even on the coldest winter day. They will not shrink or discolor, will never crimp around corners, always lay flush against the vehicle, and never need a heat gun to install because they will stay flexible. A thin layer of butyl inside the channel firmly adheres the moulding to the edge of the glass holding the moulding in place.
ET-105B | 5/8" (17mm) | 75 feet per roll | ![]() |
ET-105BFL | 5/8" (17mm) | 75 feet per roll with feature line | |
ET-107B | 3/4" (20mm) | 75 feet per roll | |
ET-107BFL | 3/4" (20mm) | 75 feet per roll with feature line | |
ET-108B | 1" (25mm) | 75 feet per roll | |
ET-109B | 1¼" (31mm) | 65 feet per roll |
All GGG Universal Mouldings:
• Reduce Inventory with GGG Universal Mouldings
• Never freeze (heat guns are not needed)
• Do not shrink or discolor over time
• Stay on without tape
• Never crimp around corners
• Always lay flush against the vehicle
• Fit both thick windshields and thin tempered parts
• Just several mouldings will fit thousands of applications
Download the GGG Universal Moulding Wall Chart
Download a List of Universal Moulding Applications
GGG® Universal Economy Underside Mouldings (Now with Black Tape)
Many vehicles are designed with exposed glass edges and exposed pinch welds. One of the biggest challenges that face the auto glass technician is the successful removal and reinstallation of these parts.
The trim that surrounds the glass often gets damaged when trying to save the glass sometimes leaving the glass part useless. Try the following Economy Underside Mouldings as a solution.
ET-201 |
5/16" (8mm) |
90' roll |
An EPDM Universal Moulding with an 8mm (5/16") lip.
ET-202 |
7/32" (5.5mm) |
100' roll |
Specifically designed to replace damaged mouldings on quarter and back glasses with radius corners. T-202 is a closed cell foam. moulding and has a 5.5mm (7/32") lip.
ET-203 | 9/32" (7mm) | 16' roll single application | ![]() |
ET-203-100 | 9/32" (7mm) | 100' roll |
A closed cell foam moulding like the T-202. It is a bit wider with a 7mm (9/32") lip.
ET-204 |
3/8" (9.53mm) |
100’ roll |
An EPDM rubber underside moulding. This mouldings profile can be used in applications with a shallow pinch welds and a wider distance from the edge of the glass.
ET-205 |
Solid ¼” (7mm) |
100’ roll |
An EPDM ET Universal Underside Moulding with an 7mm (1/4") lip
ET-206 |
Foam 3/8” (9.5mm) |
70’ roll |
A closed cell foam designed to replace damaged mouldings on windshield quarter and back glasses like Honda’s.
GGG® VT Vinyl Universal Mouldings
The GGG VT Vinyl Universal Mouldings are a cost-effective alternative to other mouldings. Available in 75' and 100' rolls.
VT-104 B |
1/2" (14mm) |
100' - w/ Butyl |
|
VT-105 B |
5/8" (17mm) |
100' - w/ Butyl |
|
VT 105 BFL |
5/8" (17mm) |
100' - w/ Detail Line w/ Butyl |
|
VT 107 B |
3/4" (20mm) |
100' - w/ Butyl |
|
VT 107 BFL |
3/4" (20mm) |
100' - w/ Detail Line w/ Butyl |
|
VT 108 B |
1" (25mm) |
75' - w/ Butyl |
|
VT 108 BFL |
1" (25mm) |
75' - w/ Detail Line w/ Butyl |
GGG® Utilimaster® Mouldings
The GGG Utilimaster Mouldings are a cost-effective alternative to other methods. Available in 75' rolls.
![]() |
![]() |
![]() |
![]() |
ET-1648-A |
Windshield Moulding |
75' roll |
ET-1648-B |
Center Moulding |
75' roll |