(Click buttons or scroll down)

GGLUE

 

• Use GGLUE to quickly bond mouldings together
• Specially formulated to bond Gold Glass Group Universal Mouldings fast

• Use this super strong UV and weather resistant adhesive to bond ends together
• No primer needed
• 1/2 ounce bottle
• Store in a cool place

Simply apply sparingly to the cut edge of the moulding, press together and hold.

 

GTOOL500

• Precise mitered cuts
• Use to cut auto glass mouldings, shower door water shedding vinyl, etc.
• Uses standard utility knife blades (Never needs sharpening)
• Made in Germany
• Comfortable, easy to squeeze handles (No hand fatigue)

GTOOL501

• Precise mitered cuts
• Use to cut auto glass mouldings, shower door water shedding vinyl, etc.
• Uses standard utility knife blades (Never needs sharpening)
• Made in Taiwan
• Lower jaw table has easy to read numbers and angle marks
• Comfortable lever cutting action

GTOOL201
Use this tool to ease the installation of the T-201 or ET-201.
Assures a straight and even application.

Installation Instructions
Before the application of the profile T-201 check the glass edges and cut away any remaining adhesive.
1. Put the profile T-201 in the application tool.
2. Apply the profile with the application tool to the cleaned or primed glass.
3. While applying the profile, keep the application tool against the edge of the glass to ensure an even application.
4. Apply at room temperatures.
5. Apply the urethane to the glass so that it is in contact with both the glass and the self adhesive profile.

Sensor Removal Tools

Click here for Removal Instructions

GTOOL301

Use this special tool to remove these rain / light sensors with hard adhesive. Once the windshield has been removed, heat the sensor lens from the outside of the windshield using a hot air dryer.

 

GTOOL302

Use this special tool to remove this rain / light sensors with hard adhesive. Once the windshield has been removed, heat the sensor lens from the outside of the windshield using a hot air dryer.

 

GTOOL303

Use this special tool to remove these rain / light sensors with hard adhesive. Once the windshield has been removed, heat the sensor lens from the outside of the windshield using a hot air dryer.

GGG^® Hot Pocket

The key to keeping mouldings pliable and easy to work with is to keep them warm. Unfortunately, in many areas from October through April this poses some challenges, especially the further north you live. Even in the summer, in most of the country, it is difficult to keep the moulding warm because the nights are chilly and if the night was cool, odds are your first job of the day will need a moulding. We now have the solution! The GGG® HotPocket Moulding Heater holds two boxes of moulding and keeps them at a very toasty 105° F. It plugs into the cigarette lighter or power port and uses the electricity of your vehicle to produce the heat. The HotPocket draws only 2.8 amps of 12-Volt electricity and has a self-protecting design that will not let it draw more than 5 amps. Made of Ballistic Nylon.

GGG^® Windshield Chisel Sticks
(Part # GGG STICK)
Blue Stick (as shown in photo)

Let us customize a stick with your logo!

Call today for a quote 800-448-5188

• Any color you want
• Keep your company name in the hands of your customers
• Chisel End Windshield Sticks • Round at one end and Chisel at the other
or
• Round at one end and Round at the other
• A Great Tool for Every Glass installer
• Choose slim or regular thicknesses
• A great marketing tool